Detailed components
Quick reference
Keyless Entry Transmitter Battery
1 procedure
Keyless Entry Transmitter Battery: Service and Repair
- Using a thin coin, gently pry at the notch in the center seam of the RKE transmitter case halves near the key ring until the two halves unsnap.
- Lift the back half of the transmitter case off of the RKE transmitter.
- Remove the two batteries from the RKE transmitter.
- Replace the two batteries with new Panasonic 2016 (if equipped with one battery, use 2032), or equivalent. Be certain that the batteries are installed with their polarity correctly oriented.
- Align the two RKE transmitter case halves with each other, and squeeze them firmly and evenly together until they snap back into place.