‹

Hood Stop

Body and Frame › Doors, Hood and Trunk
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Hood Bumper - Installation1 step
Fig. 1
Fig. 1
  1. Install the hood adjustment bumpers. Make sure there are no excessive gaps between the areas around the hood, adjust as necessary, .
Hood Bumper - Removal1 step
Fig. 1
Fig. 1
  1. Remove the hood adjustment bumpers.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
BUMPER - HOOD📷 2
1. Remove the hood adjustment bumpers.
figure
figure
BUMPER - HOOD📷 1
1. Install the hood adjustment bumpers. Make sure there are no excessive gaps between the areas around the hood, adjust as necessary, see SPECIFICATIONS.
HINGE - HOOD
figure