‹

Passenger Assist Handle

Body and Frame › Interior Moulding / Trim
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Grab Handle - Removal2 steps
Fig. 1
Fig. 1
  1. Using a small pry tool or equivalent, release the assist handle by prying open the covers (1) at either end.
  2. Remove the screws (2) from the assist handle.
Grab Handle - Installation2 steps
ℹ NOTE
Inspect and replace the screw retaining clips if damaged.
Fig. 1
Fig. 1
  1. Position the assist handle to the headliner and install the screws (2).
  2. Close the covers (1) on either end of the assist handle.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
HANDLE - ASSIST📷 2
1. Using a small pry tool or equivalent, release the assist handle by prying open the covers (1) at either end. 2. Remove the screws (2) from the assist handle.
figure
figure
HANDLE - ASSIST📷 2
NOTE: Inspect and replace the screw retaining clips if damaged.
1. Position the assist handle to the headliner and install the screws (2). 2. Close the covers (1) on either end of the assist handle.
HEADLINER
figure
figure