‹

Sunroof / Moonroof Drain

Body and Frame › Roof and Associated Components
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Sunroof Drain Tube - Removal6 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
Fig. 3
Fig. 3
  1. Drop down the headliner as necessary to gain access to the drain hoses, Headliner - Removal.
  2. Disconnect the front hose (2) from the sunroof assembly (1).
  3. Release the support clips (3) and disconnect the lower grommet and remove the hose.
  4. Disconnect the rear hose (2) from the sunroof assembly (1) and release the support clips (3).
  5. Separate the remaining support clips (1).
  6. Disconnect the grommet (2) from the body (3) and remove the rear hose as necessary.
Sunroof Drain Tube - Installation6 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
Fig. 3
Fig. 3
  1. Install the rear hose (4) and connect the grommet (2) to the body (3).
  2. Connect the support clips (1).
  3. Route the hose as required and connect the remaining support clips (3).
  4. Connect the hose (2) to the sunroof assembly (1).
  5. Connect the front hose lower grommet to the body.
  6. Connect the front hose (2) to the sunroof assembly (1) and connect the support clips (3).
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
HOSE - SUNROOF DRAIN📷 3
1. Drop down the headliner as necessary to gain access to the drain hoses, see REMOVAL. 2. Disconnect the front hose (2) from the sunroof assembly (1). 3. Release the support clips (3) and disconnect the lower grommet and remove the hose.
4. Disconnect the rear hose (2) from the sunroof assembly (1) and release the support clips (3).
5. Separate the remaining support clips (1). 6. Disconnect the grommet (2) from the body (3) and remove the rear hose as necessary.
figure
figure
figure
HOSE - SUNROOF DRAIN📷 4
1. Install the rear hose (4) and connect the grommet (2) to the body (3).
2. Connect the support clips (1).
3. Route the hose as required and connect the remaining support clips (3). 4. Connect the hose (2) to the sunroof assembly (1).
5. Connect the front hose lower grommet to the body. 6. Connect the front hose (2) to the sunroof assembly (1) and connect the support clips (3).
MOTOR - SUNROOF WITH CONTROL UNT
figure
figure
figure
figure