‹

Power Door Lock Switch

Body and Frame › Sensors and Switches - Body and Frame
Unified entry — merged from multiple cross-listed pages in the original manual.

Labor

Replace — Front Door — One0.3 hr
Warranty 0.0 hrSkill B
Replace — Front Door — One0.3 hr
Warranty 0.0 hrSkill B
Procedures
Power Lock Switch - Removal3 steps
Fig. 1
Fig. 1
  1. Disconnect and isolate the battery negative cable.
  2. Gently pry the switch from the door trim panel.
  3. Disconnect electrical harness connector from switch.
Power Lock Switch - Installation3 steps
Fig. 1
Fig. 1
  1. Connect the electrical harness connector to the switch.
  2. Press the switch into place.
  3. Connect the battery negative cable.
Power Lock Switch - Removal3 steps
Fig. 1
Fig. 1
  1. Disconnect and isolate the battery negative cable.
  2. Gently pry the switch from the door trim panel.
  3. Disconnect electrical harness connector from switch.
Power Lock Switch - Installation3 steps
Fig. 1
Fig. 1
  1. Connect the electrical harness connector to the switch.
  2. Press the switch into place.
  3. Connect the battery negative cable.