‹

Hood Weatherstrip

Body and Frame › Weatherstrip
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Hood to Cowl Weatherstrip - Installation2 steps
Fig. 1
Fig. 1
  1. Install the cowl weather-strip (1) to the cowl grille.
  2. Remove the hood support rod and lower the hood.
Hood to Cowl Weatherstrip - Removal2 steps
Fig. 1
Fig. 1
  1. Raise and support the hood.
  2. Remove the cowl weather-strip (1) by peeling the cowl seal from the cowl grille.
Hood to Cowl Weatherstrip - Installation2 steps
Fig. 1
Fig. 1
  1. Install the cowl weather-strip (1) to the cowl grille.
  2. Remove the hood support rod and lower the hood.
Hood to Cowl Weatherstrip - Removal2 steps
Fig. 1
Fig. 1
  1. Raise and support the hood.
  2. Remove the cowl weather-strip (1) by peeling the cowl seal from the cowl grille.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
WEATHERSTRIP - HOOD TO COWL📷 2
1. Raise and support the hood. 2. Remove the cowl weather-strip (1) by peeling the cowl seal from the cowl grille.
figure
figure
WEATHERSTRIP - HOOD TO COWL📷 2
1. Install the cowl weather-strip (1) to the cowl grille. 2. Remove the hood support rod and lower the hood.
WEATHERSTRIP - LIFT GATE OPENING
figure
figure