‹

Sunroof / Moonroof Weatherstrip

Body and Frame › Weatherstrip
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Sunroof Glass Seal - Installation3 steps
ℹ NOTE
Always position seal seam on center of the passenger side of glass panel.
Fig. 1
Fig. 1
  1. Place seal (1) into position.
  2. Seat the seal (1) into the glass channel fully. Using care working the seal around the glass (2), being careful not to over stretch the seal while installing.
  3. Install the glass panel, Sunroof Glass - Installation.
Sunroof Glass Seal - Removal3 steps
  1. Remove sunroof glass panel, Sunroof Glass - Removal
  2. Place glass panel on clean work area with the top side up. Support the glass assembly from underside to avoid bending or otherwise damaging the mounting tabs.
  3. Grasp the seal and pull seal away from the glass panel. The seal is a one piece seal.
Sunroof Glass Seal - Installation3 steps
ℹ NOTE
Always position seal seam on center of the passenger side of glass panel.
Fig. 1
Fig. 1
  1. Place seal (1) into position.
  2. Seat the seal (1) into the glass channel fully. Using care working the seal around the glass (2), being careful not to over stretch the seal while installing.
  3. Install the glass panel, Sunroof Glass - Installation.
Sunroof Glass Seal - Removal3 steps
  1. Remove sunroof glass panel, Sunroof Glass - Removal
  2. Place glass panel on clean work area with the top side up. Support the glass assembly from underside to avoid bending or otherwise damaging the mounting tabs.
  3. Grasp the seal and pull seal away from the glass panel. The seal is a one piece seal.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
SEAL- SUNROOF GLASS📷 1
1. Remove sunroof glass panel, see REMOVAL. 2. Place glass panel on clean work area with the top side up. Support the glass assembly from underside to avoid bending or otherwise damaging the mounting tabs. 3. Grasp the seal and pull seal away from the glass panel. The seal is a one piece seal.
figure
SEAL- SUNROOF GLASS📷 1
NOTE: Always position seal seam on center of the passenger side of glass panel.
1. Place seal (1) into position. 2. Seat the seal (1) into the glass channel fully. Using care working the seal around the glass (2), being careful not to over stretch the seal while installing. 3. Install the glass panel, see INSTALLATION.
SUNROOF - MODULE/FRAME ASSEMBLY
figure