‹

Fluid - Transfer Case

Maintenance › Fluids
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Capacity Specificationsreference
TRANSFER CASE FLUID MP1522 1.8 L (1.9 quarts) MP3022 1.9 L (2.0 quarts)
MP1522 Transfer Case - Fluid Drain And Refill8 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Raise vehicle. Ensure that the vehicle is level on the hoist.
  2. Position drain pan under transfer case.
  3. Remove drain and fill plugs and drain lubricant completely.
  4. Install drain plug. Tighten plug to 20-34 Nm (15-25 ft. lbs.).
  5. Remove drain pan.
  6. Fill transfer case to bottom edge of fill plug opening with MOPAR(R) ATF + 4.
  7. Install and tighten fill plug to 20-34 Nm (15-25 ft. lbs.).
  8. Lower vehicle.
MP3022 Transfer Case - Fluid Drain And Refill7 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Raise vehicle. Ensure that the vehicle is level on the hoist.
  2. Position drain pan under transfer case.
  3. Remove fill plug (1) and drain plug (2) and drain lubricant completely.
  4. Install drain plug (2) and tighten plug to 27 Nm (20 ft. lbs.).
  5. Fill transfer case to bottom edge of fill plug opening with MOPAR(R) ATF+4
  6. Install and tighten fill plug (1) and tighten plug to 27 Nm (20 ft. lbs.).
  7. Lower vehicle.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
TRANSFER CASE - MP1522
The MP1522 transfer case uses MOPAR® ATF + 4 automatic transmission fluid.
TRANSFER CASE - MP3022
The MP3022 transfer case uses MOPAR® ATF + 4 automatic transmission fluid.
TRANSFER CASE
MP1522 (Approximate dry fill or fill to bottom edge of the 3.80 Pints 1.80 Liters fill plug hole.) MP3022 (Approximate dry fill or fill to bottom edge of the 4.01 Pints 1.90 Liters fill plug hole.)