‹

Tire Pressure Monitor Receiver / Transponder

Maintenance › Wheels and Tires
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Tire Pressure Monitoring (TPM) Transponder - Removal — Rear4 steps
Fig. 1
Fig. 1
  1. Raise and support the vehicle.
  2. Disconnect the electrical connector (1).
  3. Remove the mounting nuts (3) for the transponder (4).
  4. Remove the transponder (4) from the bracket (2).
Tire Pressure Monitoring (TPM) Transponder - Removal — Front4 steps
Fig. 1
Fig. 1
  1. Raise and support the vehicle.
  2. Remove the front part wheel well housing cover and pull it back toward the tire to gain access to the transponder.
  3. Remove the mounting nuts (2) for the transponder (1) from the mounting bracket.
  4. Disconnect the electrical connector (3) and remove the transponder (1) from the vehicle.
Tire Pressure Monitoring (TPM) Transponder - Installation — Rear3 steps
Fig. 1
Fig. 1
  1. Install the transponder (4) to the bracket (2) and install the mounting nuts (3). Tighten to 3 Nm (25 in.lbs).
  2. Reconnect the electrical connector (1) to the transponder (4).
  3. Lower the vehicle.
Tire Pressure Monitoring (TPM) Transponder - Installation — Front4 steps
Fig. 1
Fig. 1
  1. Reconnect the electrical connector (3) to the transponder (1).
  2. Install the transponder (1) to the mounting bracket and install the mounting nuts (2). Tighten nuts to 3 Nm (25 in.lbs.).
  3. Install the front part of the wheel well housing cover.
  4. Lower the vehicle.
Tire Pressure Monitoring (TPM) Transponder - Removal — Rear4 steps
Fig. 1
Fig. 1
  1. Raise and support the vehicle.
  2. Disconnect the electrical connector (1).
  3. Remove the mounting nuts (3) for the transponder (4).
  4. Remove the transponder (4) from the bracket (2).
Tire Pressure Monitoring (TPM) Transponder - Removal — Front4 steps
Fig. 1
Fig. 1
  1. Raise and support the vehicle.
  2. Remove the front part wheel well housing cover and pull it back toward the tire to gain access to the transponder.
  3. Remove the mounting nuts (2) for the transponder (1) from the mounting bracket.
  4. Disconnect the electrical connector (3) and remove the transponder (1) from the vehicle.
Tire Pressure Monitoring (TPM) Transponder - Installation — Rear3 steps
Fig. 1
Fig. 1
  1. Install the transponder (4) to the bracket (2) and install the mounting nuts (3). Tighten to 3 Nm (25 in.lbs).
  2. Reconnect the electrical connector (1) to the transponder (4).
  3. Lower the vehicle.
Tire Pressure Monitoring (TPM) Transponder - Installation — Front4 steps
Fig. 1
Fig. 1
  1. Reconnect the electrical connector (3) to the transponder (1).
  2. Install the transponder (1) to the mounting bracket and install the mounting nuts (2). Tighten nuts to 3 Nm (25 in.lbs.).
  3. Install the front part of the wheel well housing cover.
  4. Lower the vehicle.