‹

Sunroof / Moonroof Module

Relays and Modules › Relays and Modules - Body and Frame
Unified entry — merged from multiple cross-listed pages in the original manual.

Labor

Replace — Control Module — Sunroof Motor2.0 hr
Warranty 0.0 hrSkill B
Sky Slider Motor0.8 hr
Warranty 0.0 hrSkill B
Procedures
Power Top Control Module - Installation6 steps
Fig. 1
Fig. 1
  1. Position the module (2) onto the power full open retractable roof assembly.
  2. Install the two mounting screws (1).
  3. Connect the electrical connectors (3).
  4. Install the headliner, Headliner - Installation.
  5. Connect the battery negative cable.
  6. Re-initialize roof assembly, Full Open Retractable Roof - Retractable Roof Initialization Procedure.
Power Top Control Module - Removal4 steps
Fig. 1
Fig. 1
  1. Disconnect and isolate the battery negative cable.
  2. Drop rear of headliner down as needed to gain access to the module, Headliner - Removal.
  3. Disconnect the electrical connectors (3) from the module.
  4. Remove the two screws (1) and separate the module (2) from the roof system.