‹

Lateral Stabilizer Rod

Steering and Suspension › Suspension
Unified entry — merged from multiple cross-listed pages in the original manual.

Parts

PartTrack Bar
ManufacturerCHY
OEM part #52109914AB
Price$113.00

Labor

Replace — Rear Suspension — Track Bar0.8 hr
Warranty 0.0 hrSkill B
Procedures
Rear Track Bar - Installation6 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Install the track bar (3) to the vehicle.
  2. Install the track bar bolt and nut (1) in the frame bracket (2).
  3. Install the track bar (1) into the axle bracket (3).
  4. Install the track bar bolt and nut (2) in the axle bracket.
  5. Remove the supports and lower the vehicle.
  6. Tighten the body side mounting bolt/nut to 183 Nm (135 ft. lbs.). Tighten the axle side mounting bolt/nut to 176 Nm (130 ft. lbs.). with full vehicle weight.
Rear Track Bar - Removal4 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Raise and support the vehicle. Position a hydraulic jack under the axle to support the axle.
  2. Remove the track bar flagbolt and nut (1) from the frame bracket (2).
  3. Remove the track bar bolt and nut (2) from the axle bracket (3).
  4. Remove the track bar (1).
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
TRACK BAR📷 1
1. Raise and support the vehicle. Position a hydraulic jack under the axle to support the axle. 2. Remove the track bar flag bolt and nut (1) from the frame bracket (2).
3. Remove the track bar bolt and nut (2) from the axle bracket (3). 4. Remove the track bar (1).
figure
TRACK BAR📷 4
1. Install the track bar (3) to the vehicle. 2. Install the track bar bolt and nut (1) in the frame bracket (2).
  3.   Install the track bar (1) into the axle bracket (3).
  4.   Install the track bar bolt and nut (2) in the axle bracket.
  5.   Remove the supports and lower the vehicle.
  6.   Tighten the body side mounting bolt/nut to 183 N.m (135 ft. lbs.). Tighten the axle side mounting bolt/nut
to 176 N.m (130 ft. lbs.) with full vehicle weight.
figure
figure
figure
figure