‹

Suspension Travel Bumper

Steering and Suspension › Suspension
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Rear Suspension Jounce Bumper - Installation3 steps
Fig. 1
Fig. 1
  1. Install the jounce bumper into the mount by twisting the bumper into place.
  2. Install the coil spring Rear Suspension Coil Spring(s) - Installation.
  3. Install the shock Rear Shock Absorber - Installation.
Rear Suspension Jounce Bumper - Removal3 steps
Fig. 1
Fig. 1
  1. Remove the shock Rear Shock Absorber - Removal.
  2. Remove the coil spring Rear Suspension Coil Spring(s) - Removal.
  3. Pull the jounce bumper downwards to remove. (Figure 1)
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
JOUNCE BUMPER📷 1
1. Remove the shock. See REMOVAL. 2. Remove the coil spring. See REMOVAL. 3. Pull the jounce bumper downwards to remove. See Fig. 87
figure
JOUNCE BUMPER📷 1
1. Install the jounce bumper into the mount by twisting the bumper into place. See Fig. 87. 2. Install the coil spring. See INSTALLATION. 3. Install the shock. See INSTALLATION.
STABILIZER BAR
figure