‹

Transmission Cooler

Transmission and Drivetrain › Automatic Transmission/Transaxle
Unified entry — merged from multiple cross-listed pages in the original manual.

Labor

Replace — Oil Cooler1.4 hr
Warranty 0.0 hrSkill B
Procedures
Installation5 steps
  1. Position transmission cooler in vehicle.
  2. Install transmission cooler mounting bolts. Tighten to 14 Nm (123 in. lbs.)
  3. Install transmission cooler lines into transmission cooler, Service and Repair.
  4. Install locking plate and nut. Tighten nut to 22.5 Nm (200 in. lbs.)
  5. Install electric cooling fan Electric Radiator Fan - Installation.
Removal6 steps
Fig. 1
Fig. 1
  1. Remove electric cooling fan Electric Radiator Fan - Removal.
  2. Position cooling fan out of the way.
  3. Remove the transmission cooler line retaining block nut.
  4. Using Release Tool , disconnect transmission cooler lines, Service and Repair.
  5. Remove the transmission cooler mounting bolts.
  6. Remove transmission cooler from vehicle.