‹

Flex Plate

Transmission and Drivetrain › Flex Plate
Unified entry — merged from multiple cross-listed pages in the original manual.

Labor

Replace3.2 hr
Warranty 0.0 hrSkill B
With 4WD, Add1.2 hr
Warranty 0.0 hrSkill B
Procedures
Flex Plate: Specificationsreference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
FLEX PLATE Tighten the flexplate retaining bolts 95 Nm (70 ft. lbs.)
Flexplate - Removal2 steps
Fig. 1
Fig. 1
  1. Remove the transmission. Removal
  2. Remove the bolts (1) and then the flexplate (2).
Flexplate - Installation3 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Position the flexplate (1) onto the crankshaft and install the bolts hand tight.
  2. Tighten the flexplate retaining bolts to 95 Nm (70 ft. lbs.) in the sequence shown (Figure 1).
  3. Install the transmission.