‹

Four Wheel Drive Selector Switch

Transmission and Drivetrain › Sensors and Switches - Transmission and Drivetrain
Unified entry — merged from multiple cross-listed pages in the original manual.

Labor

Replace — Control Switch0.4 hr
Warranty 0.0 hrSkill B
Replace — Control Switch0.4 hr
Warranty 0.0 hrSkill B
Replace — Control Switch0.4 hr
Warranty 0.0 hrSkill B
Procedures
MP1522 Transfer Casereference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
DESCRIPTION Figure 1 - PART-TIME 4WD ELECTRONIC TC SWITCH The selector switch assembly is mounted in the left side of the shifter assembly and consists of a momentary contact T-handle for shifts to and from 2WD, 4WD LOCK and 4WD LOW and a recessed push pin button for shifts into and out of NEUTRAL.
MP3022 Transfer Casereference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
DESCRIPTION Figure 1 - MP3022 TRANSFER CASE SWITCH Electric shifting between 4WD Auto and 4WD Low is accomplished with a console-mounted switch. A pushpin button is used to shift to Neutral mode.
MP1522 Transfer Casereference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
DESCRIPTION Figure 1 - PART-TIME 4WD ELECTRONIC TC SWITCH The selector switch assembly is mounted in the left side of the shifter assembly and consists of a momentary contact T-handle for shifts to and from 2WD, 4WD LOCK and 4WD LOW and a recessed push pin button for shifts into and out of NEUTRAL.
MP3022 Transfer Casereference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
DESCRIPTION Figure 1 - MP3022 TRANSFER CASE SWITCH Electric shifting between 4WD Auto and 4WD Low is accomplished with a console-mounted switch. A pushpin button is used to shift to Neutral mode.
MP1522 Transfer Casereference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
DESCRIPTION Figure 1 - PART-TIME 4WD ELECTRONIC TC SWITCH The selector switch assembly is mounted in the left side of the shifter assembly and consists of a momentary contact T-handle for shifts to and from 2WD, 4WD LOCK and 4WD LOW and a recessed push pin button for shifts into and out of NEUTRAL.
MP3022 Transfer Casereference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
DESCRIPTION Figure 1 - MP3022 TRANSFER CASE SWITCH Electric shifting between 4WD Auto and 4WD Low is accomplished with a console-mounted switch. A pushpin button is used to shift to Neutral mode.
MP1522 Transfer Casereference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
DESCRIPTION Figure 1 - PART-TIME 4WD ELECTRONIC TC SWITCH The selector switch assembly is mounted in the left side of the shifter assembly and consists of a momentary contact T-handle for shifts to and from 2WD, 4WD LOCK and 4WD LOW and a recessed push pin button for shifts into and out of NEUTRAL.
MP3022 Transfer Casereference
Fig. 1
Fig. 1
Fig. 2
Fig. 2
DESCRIPTION Figure 1 - MP3022 TRANSFER CASE SWITCH Electric shifting between 4WD Auto and 4WD Low is accomplished with a console-mounted switch. A pushpin button is used to shift to Neutral mode.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
TRANSFER CASE SELECTOR SWITCH📷 1
1 - 4WD LOW POSITION
2 - 4WD LOCK POSITION 3 - 2WD POSITION 4 - NEUTRAL POSITION
The selector switch assembly is mounted in the left side of the shifter assembly and consists of a momentary contact T-handle for shifts to and from 2WD, 4WD LOCK and 4WD LOW and a recessed push pin button for shifts into and out of NEUTRAL.
ASSEMBLY-SHIFT MOTOR/MODE SENSOR
figure
TRANSFER CASE SELECTOR SWITCH📷 1
1 - 4WD LOW POSITION 2 - 4WD AUTO POSITION 3 - 2WD POSITION 4 - NEUTRAL POSITION
Electric shifting between 4WD Auto and 4WD Low is accomplished with a console-mounted switch. A pushpin button is used to shift to Neutral mode.
figure