Procedures
Amplifier - Removal
- Disconnect and isolate the battery negative cable.
- Remove the rear quarter trim panel. Quarter Trim Panel - Removal.
- Remove the mounting fasteners.
- Disconnect the electrical connectors and remove the amplifier.
Amplifier - Installation
- Connect the electrical connectors and install the amplifier.
- Install the amplifier mounting fasteners.
- Install the rear quarter trim panel. Quarter Trim Panel - Installation.
- Connect the battery negative cable.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
AMPLIFIER
Removal
1
Disconnect and isolate the battery negative cable.
2
Remove the rear quarter trim panel. Refer to REMOVAL .
3
Remove the mounting fasteners.
4
Disconnect the electrical connectors and remove the amplifier.
Installation
1
Connect the electrical connectors and install the amplifier.
2
Install the amplifier mounting fasteners.
3
Install the rear quarter trim panel. Refer to INSTALLATION .
4
Connect the battery negative cable.
ANTENNA BODY & CABLE
