‹

Towing Hook / Bracket

Accessories and Optional Equipment › Towing / Trailer System
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Front Tow Hook(s) - Removal6 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Remove the jounce bumper spacer, Service and Repair.
  2. Remove the tow hook (4) from the eye assembly (6).
  3. Remove the bolts (5) from the eye assembly (6).
  4. Remove the nuts (7) from the eye assembly (6).
  5. Remove the eye assembly (6) from the front bumper crossmember (1).
  6. Remove the stud plate (2) and body fasteners (3) from the front bumper crossmember (1).
Rear Tow Hook(s) - Removal3 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Remove four bolts (5) from the tow hook/eye (4).
  2. Remove the tow hook/eye (4) from the body (1).
  3. Remove the body fastener (3) from the rear crossmember (2).
Rear Tow Hook(s) - Installation3 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Install the body fastener (3) to the rear crossmember (2).
  2. Install the tow hook/eye (4) to the body (1).
  3. Install four bolts (5) to the tow hook/eye (4) and tighten to 88 Nm (65 ft. lbs.).
Front Tow Hook(s) - Installation5 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Install the stud plate (2) and body fasteners (3) to the front bumper crossmember (1).
  2. Install the eye assembly (6) to the front bumper crossmember (1).
  3. Install the nuts (7) and bolts (5) to the eye assembly (6) and tighten to 61 Nm (45 ft. lbs.).
  4. Install the tow hook (4) to the eye assembly (6).
  5. Install the jounce bumper spacer, Service and Repair.