‹

Fuel Door

Body and Frame › Doors, Hood and Trunk
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Fuel Fill Door - Removal4 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Remove the fuel cap.
  2. Remove the three screws connecting the fuel door/housing to the filler neck.
  3. Reach in through the opening and depress the tabs (2) at the upper and bottom right of the door/housing.
  4. Remove the fuel door/housing from the vehicle.
Fuel Fill Door - Installation3 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Position the fuel filler door/housing into the vehicle and fully seat the tabs (2).
  2. Install the three screws.
  3. Install the fuel cap.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
DOOR - FUEL FILL📷 1
1 - FUEL FILL DOOR 2 - HOUSING TABS
1. Remove the fuel cap.
2. Remove the three screws connecting the fuel door/housing to the filler neck. 3. Reach in through the opening and depress the tabs (2) at the upper and bottom right of the door/housing. 4. Remove the fuel door/housing from the vehicle.
figure
DOOR - FUEL FILL📷 1
1 - FUEL FILL DOOR 2 - HOUSING TABS
1. Position the fuel filler door/housing into the vehicle and fully seat the tabs (2). 2. Install the three screws. 3. Install the fuel cap.
FENDER - FRONT
figure