Glove Compartment — Liberty Service Manual

Procedures

Glove Box Door Latch Striker - Installation3 steps

Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
Install the striker and install the two screws.
Loosen the screws to adjust if necessary.

Glove Box Door Latch Striker - Removal3 steps

Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
Open the glove box.
Remove the two striker screws and remove the latch striker.

Glove Box Door Latch - Removal3 steps

Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
Remove the glove box, Instrument Panel Glove Box - Removal.
Remove the three screws and remove the glove box latch.

Instrument Panel Glove Box - Installation3 steps

Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions.
Position the box on and slide the box to the left to engage the hinges.
Close the glove box.

Instrument Panel Glove Box - Removal4 steps

Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
Open the glove box.
Squeeze the stop tabs located on the sides of the box while and swing the glove box door open.
With box in the full down position slide the box to the right off of the hinges and remove.

Glove Box Door Latch - Installation4 steps

Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
Position the latch to the glove box.
Install the three screws.
Install the glove box, Instrument Panel Glove Box - Installation.

Factory service manual

From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.

GLOVE BOX - INSTRUMENT PANEL📷 1