‹

Scuff Plate

Body and Frame › Interior Moulding / Trim
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Scuff Plate - Installation2 steps
Fig. 1
Fig. 1
  1. Align the trim clips and use hand pressure to install the scuff plate (1) to the body (2).
  2. Close the lift gate.
Scuff Plate - Removal2 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Open the lift gate.
  2. Using a trim stick or equivalent, release the retaining clips and remove the scuff plate (1) from the body (2).
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
PLATE - SCUFF📷 2
1. Open the lift gate. 2. Using a trim stick C-4755 or equivalent, release the retaining clips and remove the scuff plate (1) from the body (2).
figure
figure
PLATE - SCUFF📷 2
1. Align the trim clips and use hand pressure to install the scuff plate (1) to the body (2).
2. Close the lift gate.
SUPPORT - SUN VISOR
figure
figure