‹

Door Lock Cylinder

Body and Frame › Locks
Unified entry — merged from multiple cross-listed pages in the original manual.

Parts

PartLock Cylinder
ManufacturerCHY
OEM part #68001713AA
Price$54.45

Labor

Replace — Front Door — One Side1.2 hr
Warranty 0.0 hrSkill B
To Recode Lock Cylinder, Add — Each0.3 hr
Warranty 0.0 hrSkill B
Procedures
Door Lock Cylinder - Installation3 steps
ℹ NOTE
The lever on the key cylinder needs to point forward.
ℹ NOTE
Make sure the door lock cylinder (2) is engaged to the carrier plate (4).
Fig. 1
Fig. 1
  1. Install lock cylinder (2) and gasket (1) to door (3).
  2. Install lock cylinder retainer (5) to door lock cylinder (2).
  3. Install the carrier plate to the door, Front Door Carrier Plate - Installation.
Door Lock Cylinder - Removal3 steps
Fig. 1
Fig. 1
  1. Remove carrier plate from door, Front Door Carrier Plate - Removal.
  2. Remove door lock cylinder retainer (5) from door lock cylinder (2).
  3. Remove door lock cylinder (2) and gasket (1) from door (3).
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
CYLINDER - FRONT DOOR LOCK📷 1
1. Remove carrier plate from door, see REMOVAL. 2. Remove door lock cylinder retainer (5) from door lock cylinder (2). 3. Remove door lock cylinder (2) and gasket (1) from door (3).
figure
CYLINDER - FRONT DOOR LOCK📷 2
NOTE: The lever on the key cylinder needs to point forward.
1. Install lock cylinder (2) and gasket (1) to door (3). 2. Install lock cylinder retainer (5) to door lock cylinder (2).
NOTE: Make sure the door lock cylinder (2) is engaged to the carrier plate (4).
3. Install the carrier plate to the door, see INSTALLATION.
RUN CHANNEL - FRONT DOOR GLASS
figure
figure