Procedures
Dynamics Sensor - Removal

- Remove the center console Service and Repair.
- Disconnect electrical connector (3) from the dynamics sensor (2).
- Remove the two nuts (1) securing the sensor to the floor.
- Remove the sensor (2).
Dynamics Sensor - Installation

- Install the dynamics sensor (2) to the vehicle.
- Install the electrical connector (3) making sure that the connector is fully seated into the sensor (2)
- Install the two retaining nuts (1) and tighten to 9 Nm (80 in. lbs.).
- Install the floor console Service and Repair.
Lateral Accelerometer: Description and Operation

DESCRIPTION The Yaw Rate and Lateral Acceleration Sensors are housed into one unit known as the Dynamics Sensor (2). The sensor is used to measure side-to-side (Lateral) motion and vehicle rotational sensing (how fast the vehicle is turning - Yaw). Yaw and Lateral Acceleration Sensors cannot be serviced separately. The entire Dynamics Sensor (2) must be replaced when necessary.
Dynamics Sensor - Removal

- Remove the center console Service and Repair.
- Disconnect electrical connector (3) from the dynamics sensor (2).
- Remove the two nuts (1) securing the sensor to the floor.
- Remove the sensor (2).
Dynamics Sensor - Installation

- Install the dynamics sensor (2) to the vehicle.
- Install the electrical connector (3) making sure that the connector is fully seated into the sensor (2)
- Install the two retaining nuts (1) and tighten to 9 Nm (80 in. lbs.).
- Install the floor console Service and Repair.
Lateral Accelerometer: Description and Operation

DESCRIPTION The Yaw Rate and Lateral Acceleration Sensors are housed into one unit known as the Dynamics Sensor (2). The sensor is used to measure side-to-side (Lateral) motion and vehicle rotational sensing (how fast the vehicle is turning - Yaw). Yaw and Lateral Acceleration Sensors cannot be serviced separately. The entire Dynamics Sensor (2) must be replaced when necessary.