‹

Muffler

Engine, Cooling and Exhaust › Exhaust System
Unified entry — merged from multiple cross-listed pages in the original manual.

Parts

PartMuffler
ManufacturerCHY
OEM part #52125078AG
Price$380.00
NotesIncludes: Tail Pipe.

Labor

Replace0.4 hr
Warranty 0.0 hrSkill B
Procedures
Installation4 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Install muffler and tailpipe assembly in vehicle and attach to exhaust hangers.
  2. Install muffler and tailpipe assembly to exhaust pipe.
  3. Install clamp. Tighten nut to 32 Nm. (24 ft. lbs.).
  4. Lower vehicle from hoist.
Removal4 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Raise vehicle on hoist.
  2. Remove exhaust pipe to muffler and tailpipe assembly clamp nuts (2).
  3. Using a suitable pry bar, pry muffler and tailpipe assembly out of exhaust hanger.
  4. Remove muffler and tailpipe assembly (3) from vehicle.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
MUFFLER📷 1

Removal

1 - CATALYTIC CONVERTER PIPE 2 - CLAMP 3 - MUFFLER/RESONATOR/TAILPIPE ASSEMBLY 4 - HANGER ROD
1
Raise vehicle on hoist.
2
Remove exhaust pipe to muffler and tailpipe assembly clamp nuts (2).
3
Using a suitable pry bar, pry muffler and tailpipe assembly out of exhaust hanger.
4
Remove muffler and tailpipe assembly (3) from vehicle.

Installation

1 - CATALYTIC CONVERTER PIPE 2 - CLAMP 3 - MUFFLER/RESONATOR/TAILPIPE ASSEMBLY 4 - HANGER ROD
1
Install muffler and tailpipe assembly in vehicle and attach to exhaust hangers.
2
Install muffler and tailpipe assembly to exhaust pipe.
3
Install clamp. Tighten nut to 32 N.m (24 ft. lbs.).
4
Lower vehicle from hoist.
figure