‹

Oil Pressure Sender

Sensors and Switches › Sensors and Switches - Engine
Unified entry — merged from multiple cross-listed pages in the original manual.

Parts

PartOil Pressure Sending Unit
ManufacturerCHY
OEM part #5149097AA
Price$24.35

Labor

Replace0.7 hr
Warranty 0.0 hrSkill B
Procedures
Oil Pressure Switch - Removal5 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
  1. Disconnect the negative cable from the battery.
  2. Raise vehicle on hoist.
  3. Remove front splash shield.
  4. Disconnect oil pressure sender wire (4).
  5. Remove the pressure sender (Figure 1)(2).
Oil Pressure Switch - Installation5 steps
Fig. 1
Fig. 1
  1. Install oil pressure sender (2).
  2. Connect oil pressure sender wire (4).
  3. Install front splash shield.
  4. Lower vehicle.
  5. Connect the negative battery cable.