‹

Stabilizer Link

Steering and Suspension › Suspension
Unified entry — merged from multiple cross-listed pages in the original manual.

Parts

PartLink
ManufacturerCHY
OEM part #52125295AC
Price$28.35
PartLink
ManufacturerCHY
OEM part #68029024AB
Price$49.75

Labor

Replace — Front Suspension — One0.4 hr
Warranty 0.0 hrSkill C
Both0.6 hr
Warranty 0.0 hrSkill C
Rear Suspension — One Side0.3 hr
Warranty 0.0 hrSkill C
Procedures
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
STABILIZER LINK📷 1
1.   Raise and support the vehicle.
  2.   Remove the tire and wheel assembly.
  3.   Remove the stabilizer link bolt (2) at the lower control arm.
  4.   Remove the stabilizer link bolt at the stabilizer bar.
  5.   Remove the stabilizer link (1).
figure
STABILIZER LINK📷 1
1. Install the stabilizer link (1). 2. Install the stabilizer link bolt at the stabilizer bar. Tighten the bolt to 115 N.m (85 ft. lbs.) with full vehicle weight. 3. Install the stabilizer link bolt (2) at the lower control arm. Tighten the bolt (2) to 102 N.m (75 ft. lbs.) with full vehicle weight. 4. Install the tire and wheel assembly. Refer to STANDARD PROCEDURE .
UPPER CONTROL ARM
figure
STABILIZER LINK📷 2
1.   Raise and support the vehicle.
  2.   Support the rear axle with a jack.
  3.   Remove the rear tire right side only .
  4.   Remove the upper link (2) bolt at the frame.
5. Remove the lower link nut (3) at the stabilizer bar (5). 6. Remove stabilizer link (4).
figure
figure
STABILIZER LINK📷 2
1. Install the upper bolt (2) for the stabilizer link (1) to the frame and tighten to 102 N.m (75 ft. lbs.).
2. Install the stabilizer link (4) to the stabilizer bar (5).
3. Install the nut (3) and tighten to 115 N.m (85 ft. lbs.) with full vehicle weight. 4. Install the spare tire right side only . 5. Remove the jack and lower the vehicle.
MASS DAMPER
figure
figure