‹

Window Track

Windows and Glass › Windows
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Door Glass Channel - Installation4 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
Fig. 3
Fig. 3
  1. Install the run channel to the window opening in the door.
  2. Install the front door glass to the window opening in the door, Front Door Glass - Installation.
  3. Install the carrier plate to the door, Front Door Carrier Plate - Installation.
  4. Cycle the window several times to make sure the window doesn't bind on the outer weather-strip or run channel.
Door Glass Channel - Removal3 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
Fig. 3
Fig. 3
  1. Remove the door carrier plate from the door, Front Door Carrier Plate - Removal.
  2. Remove the front door glass from the window opening in the door Front Door Glass - Removal.
  3. Remove the run channel from the window opening in the door.
Rear Door Glass Channel - Removal3 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
Fig. 3
Fig. 3
  1. Remove the carrier plate from the door, Rear Door Carrier Plate - Removal.
  2. Remove the rear door glass from the window opening in the door, Rear Door Glass - Removal.
  3. Remove the run channel (1) and quarter glass (2) from the window opening in the door.
Rear Door Glass Channel - Installation6 steps
Fig. 1
Fig. 1
Fig. 2
Fig. 2
Fig. 3
Fig. 3
  1. Lubricate entire seal using rosewater (or soapy water)
  2. Partially install the run channel (1) and quarter glass (2) into the window opening in the door. Insert front end down into door at belt opening.
  3. Seat the lower front part of the run channel (1) fully into the door channel.
  4. Install the carrier plate to the door, Rear Door Glass - Installation.
  5. Install the rear door glass to the window opening in the door, Rear Door Glass - Installation.
  6. Cycle the window several times to make sure the window doesn't bind on the outer weatherstrip or run channel.