‹

Carpet

Body and Frame › Interior Moulding / Trim
Unified entry — merged from multiple cross-listed pages in the original manual.
Procedures
Carpet - Installation7 steps
Fig. 1
Fig. 1
  1. Install the carpet to the vehicle.
  2. Route all the electrical harness pigtails into the carpet at the varies locations.
  3. Install the B-pillar lower trim, B-Pillar Trim Panel - Installation.
  4. Install the cowl trim panels, Cowl Trim Panel - Installation.
  5. Install the rear seats, Rear Seat - Installation.
  6. Install the floor console, Service and Repair.
  7. Install the front seats, Front Seat - Installation.
Carpet - Removal7 steps
Fig. 1
Fig. 1
  1. Remove front seats, Front Seat - Removal.
  2. Remove the floor console, Service and Repair.
  3. Remove the rear seats, Rear Seat - Removal.
  4. Remove the cowl trim panels, Cowl Trim Panel - Removal.
  5. Remove the B-pillar lower trim, B-Pillar Trim Panel - Removal.
  6. Remove all electrical harnesses from the carpet.
  7. Remove the carpet from the vehicle.
Factory service manual
From the 2008 KK factory manual — descriptions, specs, torque & procedures for this part.
CARPET - FLOOR📷 2
Front Carpet
  1.   Remove front seats, see REMOVAL.
  2.   Remove the floor console, see REMOVAL.
  3.   Remove the rear seats, see REMOVAL.
  4.   Remove the cowl trim panels, see REMOVAL.
  5.   Remove the B-pillar lower trim, see REMOVAL.
  6.   Remove all electrical harnesses from the carpet.
  7.   Remove the carpet from the vehicle.
figure
figure
CARPET - FLOOR📷 1
1.   Install the carpet to the vehicle.
  2.   Route all the electrical harness pigtails into the carpet at the varies locations.
  3.   Install the B-pillar lower trim, see INSTALLATION.
  4.   Install the cowl trim panels, see INSTALLATION.
  5.   Install the rear seats, see INSTALLATION.
  6.   Install the floor console, see INSTALLATION.
  7.   Install the front seats, see INSTALLATION.
COVER - B PILLAR LOWER
figure