Quick reference — screws, torque & fluids

Fast lookups for a job under the hood. The full fastener/torque tables are generated in the J-Scan guide app Reference section (pulled from the FSM); the seeded values below are the ones surfaced while building the guide.

Finish these tables from the FSM

The screw/torque tables are marked (paste from FSM) where the full data lives in the guide’s Specifications pages. Copy them in once you’ve added /guide/ (see RETRIEVAL-GUIDE.md).

Fastener / screw sizes

| Assembly | Fastener | Size / drive | Torque | | --- | --- | --- | --- | | (paste from FSM) | — | — | — |

Torque specs (common jobs)

| Job | Fastener | Torque | Notes | | --- | --- | --- | --- | | (paste from FSM) | — | — | — |

Fluid capacities

| System | Capacity | Spec | Notes | | --- | --- | --- | --- | | Engine oil (3.7L) | (paste from FSM) | 5W-20 | With filter | | Cooling system | (paste from FSM) | HOAT / MS-9769 | — | | 42RLE transmission | (paste from FSM) | ATF+4 | — |

Sensor operating ranges (quick)

| Sensor | Healthy | Source | | --- | --- | --- | | Fuel pressure | 58 ± 5 psi | FSM | | Oil pressure | ≥ 4 psi idle · 25–110 psi @ 3000 rpm | FSM | | Thermostat / ECT (warm) | ~195 °F / ~90 °C | FSM |

See Live Data & PIDs for the full sensor troubleshooting ranges.